Water Meters

  • EEC Class B & MID MI001 Approval
  • WRAS Approved Screwed Cold Water Meters
  • European drinking water approvals
  • Rated to 30°C for cold and 90°C for hot
  • High quality long life meters
  • Dry dial
  • Screwed BSP connections, DN15 to DN50 (1/2" to 2")
  • Flanged Connections, DN50 to DN200 (2" to 8")
  • Optional Pulse Output

Cold Water Meters 
Hot Water Meters
Ultrasonic Water Meters
Meter Reading

Stockshed is a UK distributor and stockist of B METERS hot and cold water meters for residential and industrial applications. Established in 1991, BMETERS is a world leading manufacturer of turbine (velocity) type single and multi jet water meters with mechanical or magnetic transmission, Woltmann meters, irrigation meters and flow meters. All meters comply with the latest legislation with WRAS approval for cold water meters and MID approval across the range.

Any water fitting when installed that carries or receives water from the public mains water supply in the UK, must comply with the Water Supply (Water Fittings) Regulations or Scottish Byelaws.  These require that a water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be of an appropriate quality and standard.

What is WRAS approval?

WRAS Approval is the easiest way to demonstrate compliance as it is granted directly by representatives of the water suppliers and is therefore accepted by every water supplier in the UK. WRAS Product Approval: Whole products such as valves, boilers & showers undergo mechanical and water quality testing. This type of approval demonstrates full compliance with requirements of the regulations and byelaws, provided the fitting is installed according to any conditions given with the approval.

>WRAS Material Approval: Non-metallic materials & components, such as rubber sheet material & ‘O’ rings, undergo testing only for their effects on water quality.  This type of approval demonstrates that the non-metallic material/component does not itself contaminate the water and therefore satisfies this particular requirement of regulations and byelaws.

What is the difference between a single jet and multi jet meter?

Single jet meters are a low cost option where there is a direct impact to the impeller from the flow of water. On a multi jet meter there are several points at which the water rotates the impeller. This gives a much longer life and retains accuracy as the load is evenly placed across the impeller. 

What is a Woltmann meter?

Sometimes known as a Helix drive meter, these are axial turbine bulk water meters used on larger sizes of 2" and upwards.

Downloads


Refine Search